TL10 Compact Track Loader



    TL10 Compact Track Loader

    The TL10V2 features a vertical lift loader arrangement and is Final Tier 4 emissions compliant.  The cab is completely redesigned and enlarged and features a low effort overhead door design for improved entry and egress. A quiet track design with wide block tread reduces vibration, noise levels, and improves ride quality.

    Product Details

    ENGINE
    EPA Final Tier 4 Emission Compliant
    Turbocharged
    High Pressure Common Rail Injection System
    DOC+DPF Exhaust After Treatment
    Automatic Fuel Bleed System
    Active Power Control Power Management System
    Working Modes - Power and ECO
    Dual Element Air Filter
    High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
    ELECTRICAL
    5.7" Color Multi-Informational Display with Rear Camera
    Sealed Rocker Switches
    12 volt System with 60 amp Alternator
    LED: Two Front and Two Rear
    Engine Preheat
    Hour Meter
    Back-up Alarm
    Horn
    UNDERCARRIAGE AND FRAME
    Double Planetary Reduction Drives
    Permanently Sealed Track Rollers with Metal Face Seals
    Fully Welded Frame with Integrated Cross Members
    2 Speed Travel
    15.7" Rubber Track
    Grease Type Track Adjuster
    Front and Rear Tie-Down Points and Lift Points
    Rear Bumper Integrated into Frame
    OPERATOR'S STATION
    Tilt-up Operator's Station
    Deluxe High Back Suspension Seat
    Rear View Camera
    Foot Throttle
    Dial Throttle Control
    Rear Pivoting Lap Bar with Arm Rest
    ROPS / FOPS Structure
    Retractable 2" Seat Belt
    Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (optional)
    Retractable 3" Seat Belt (optional)
    3 Point Retractable Seat Belt (optional)
    Polycarbonate Door and Top Guard (High Flow Only)
    HYDRAULIC & WORKING EQUIPMENT
    Vertical Lift Design
    Pilot Hydraulic Controls
    Boom Float with Detent
    Cushioned Boom Cylinders
    Hydraulic Self Leveling
    Proportional Auxiliary Hydraulic Controls with Detent
    Pressure Relieving Flat Faced Coupler Body
    14-Pin Connector with Push Button Control
    High Capacity Steel Hydraulic Tank
    Mechanical Quick Coupler
    Hydraulic Quick Coupler Cab - Standard Equipment
    Hydraulic Quick Coupler Canopy - optional
    Primary Flow Auxiliary Hydraulics 18.8 gpm
    High Flow Auxiliary Hydraulics 32.8 gpm (optional)
    Secondary Auxiliary Hydraulics 18.8 gpm (optional)
    Ride Control (optional)
    Pattern Change Valve (ISO or H) (optional)
    OPERATING PERFORMANCE
    Operating Weight - Canopy9,950 lb(4,515 kg)
    Operating Weight - Cab10,270 lb(4,660 kg)
    Tipping Load7,205 lb(3,268 kg)
    Rated Operating Capacity (ISO 14397-1)@35%*2,522 lb(1,144 kg)
    Operating Load at 50% of Tipping Load3,600 lb(1,633 kg)
    Bucket Breakout Force6,520 lb(2,957 kg)
    Lift Arm Breakout Force5,400 lb(2,450 kg)
    Traction Force9,730 lb(4,413 kg)
    Ground Pressure - Canopy4.9 psi(34.3 kPa)
    Ground Pressure - Cab5.1 psi(35.4 kPa)
    Travel Speed - Low4.8 mph(7.7 km/hr)
    Travel Speed - High7.0 mph(11.3 km/hr)
    *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
    HYDRAULIC SYSTEM
    Auxiliary Flow - Primary Circuit18.8 gpm(71.2 Lpm)
    Auxiliary Flow - High Flow (optional)32.8 gpm(124.0 Lpm)
    Hydraulic System Pressure3,481 psi(21.0 MPa)
    ENGINE
    Make / ModelKubota / V3307CR-TE4B
    Engine Displacement203 cu in(3.3 L)
    Horsepower @ 2,600 rpm74.3 hp(55.4 kW)
    Maximum Torque @ 1,500 rpm195 ft-lb(265.0 Nm)
    FLUID CAPACITIES
    Engine Lubrication11.8 qt(11.2 L)
    Cooling System15.9 qt(15.0 L)
    Fuel Tank Capacity21.5 gal(81.0 L)
    Fuel Consumption (65% of Full Load)2.7 gpm(10.3 L /hr)
    Hydraulic Reservoir Capacity9.5 gal(36.0 L)
    Hydraulic System Capacity17.2 gal(65.0 L)

    MACHINE DIMENSIONS
    Max. Lift Height to Bucket Pin10 ft 4.8 in(3,169 mm)
    Dump Height Fully Raised7 ft 11.9 in(2,435 mm)
    Dump Reach Fully Raised3 ft 1.4 in(950 mm)
    Dump Angle40°
    Rollback Angle30°
    Track Ground Contact Length4 ft 7.9 in(1,419 mm)
    Machine Length9 ft 7.2 in(2,925 mm)
    Transport Length12 ft 1.0 in(3,680 mm)
    Transport Height7 ft 5.4 in(2,270 mm)
    Departure Angle30°
    Clearance Circle with Bucket7 ft 8.5 in(2,350 mm)
    Clearance Circle without Bucket5 ft 0 in(1,535 mm)
    Clearance Circle Rear5 ft 5.2 in(1,655 mm)
    Track Width15.7 in(400 mm)
    Ground Clearance12.6 in(320 mm)
    Overall Width without Bucket5 ft 8.5 in(1,740 mm)

























Applications and Uses

  • Moving
  • Loading
  • Grading
  • Attachments available